You do not have access to the Beam Nesting tool. This tool is limited to
a small group of named users. If you think you should have access, please
speak to the FORGE administrator.
End trim removes damaged bar ends before cutting. Min usable offcut flags remnants long enough to keep as stock.
Stock Bars
Available stock lengths (per section, or "any")
Section (blank = any)
Length (mm)
Qty available
Cost / bar (opt)
Rows with a blank section apply to any material as a generic stock length. Qty blank or 0 = unlimited.
Required Cuts
0 cut items
Start here: import your Tekla .xsr, or type cuts in by hand.
Part No
Profile
Grade
Finish
Length (mm)
Qty
Match
Import summary (last Tekla import)
KPI Dashboard
Cutting Schedule and Visual Layout
Cut piece Saw kerf Waste / offcut Usable remnant
No cutting plan yet
1. Import a Tekla cutting list (or add cut rows by hand) 2. Check your stock bar lengths 3. Click Optimise nest above.
Import Tekla Cutting List
Upload a Tekla .xsr cutting-list file, or paste the report text below. Zero-length fitting rows are skipped automatically; unmatched profiles import as free-text cuts.